EPSON 3800/3800C/3850 Decoder
1、For use with：EPSON 3800/3800C/3850.
2、After install this decoder, user could utilize third party ink,and
save printing cost a lot..
3、No need to reset chips ,print permanently..
Dongguan Ocbestjet Printers Consumables Co.,ltd launches EPSON
3800/3800C/3850
flat printer modification program and the chip decoder.
Product Advantage:
(1) Low cost: After install this decoder,OEM cartridge could be used
repeatedly,if use the refillable ink cartridges together with the
decoder, it will be more cost-effective,convenient,and save your production cost a lot.and
imporve the company’s competitiveness.
(2)High quality: Ocbestjet decoders fundamentally decode the circuit
of ink system,utilize chip to simulate cartridge message,after
decod the message,all color ink shows full ink volume.And during
the printing process,the ink volume will reset automatically,
Installation Process:
1、Epson 3800/3800C/3850 decoder ,insert 9 cartridge chip through the
decoder slot,and weld the 3 contactors of the chips to the 3 contactors to the
decoders,and 4 contactors
of the chips to the 4 contactors to the decoders.And remove the
chip from the waste ink
tank,and weld it to the last slot.
2、 Remove the Epson 3800/3800C/3850 printer cover,pull out of the 9
digital cables,
and insert to 9 slots of our chip decoder.And also insert the cable
from the waste in
tank tothe slot.
3. Turn on the printer and test,and all the cartridges are
accepted,and ink volumes arealways full.
4、Turn off the printer,remove all the original ink cartridges,and
pull out 9 tubingswhich connects to the printhead,use the connector tool to connect
with our eco-solvent ciss tubing,fill the corresponding color ink
,turn on the printer and test.
5、All in good condition,turn off the printer. Fix our decoder,and
make modfication to the printer according to your own plan.
Note :
1、EPSON 3800/3800C/3850 decoder, the decoder must work with a set of
original chips.
2、After using the decoder ,since the electrocircuit is totally
controled by this e-card,users insert or unplug the cartridge,the
printer will not react.It is suggested that users not unplug the
cartridges,or refill the inks when printing to avoid damage to the
printer or printhead. Users have to check the ink volume within the
ink cartridge in time,to avoid finishing the ink and hurt the
printhead.
3、Do not put device with strong signals,like mobile phone, beside the
decoders to avoid the distraction.
4 |
|
|
